topic Re: Tool list in Fusion Support Forum

Tool list

cayerpa — Wed, 30 Aug 2017 04:13:51 GMT

Hello, I do not understand why the tool bank has completely disappeared from Fusion 360. Normally, I can choose my tools and since a few pieces, the tool bank is no longer available. I noticed that there is a manage tool library but I do not understand anything is available.

Thank you for helping me please.

Patrick

Re: Tool list

masa.minohara — Wed, 30 Aug 2017 04:22:57 GMT

Hi Patrick,

Welcome to the Fusion 360 community and thank you for posting! It sounds like you are having an issue with the tool library in CAM workspace.

Do you remember where you saved tools? Local or cloud? Could you attach a screenshot of CAM tool library?

Re: Tool list

cayerpa — Wed, 30 Aug 2017 04:49:05 GMT

Hello ,

In fact, I have never saved tools in Fusion 360 because I do not really know how to do ... I would like to create the tool bank I use on my cnc. Until now I used the default bank with all the tools and I adjusted the parameters as needed. Since everything has disappeared, I am obliged to create each of my tools each time ...

On the attached image of my tool bank, everything is activated and the only tool present is the one I created

Re: Tool list

masa.minohara — Wed, 30 Aug 2017 05:21:31 GMT

Thank you for your response! Could you try changing the filter settings in the Sample library to see if tools show up? I recorded a screencast that shows how to turn on/off the tool filter, and also how to copy tools to your local tool library. Please let me know if this helps!

Re: Tool list

cayerpa — Wed, 30 Aug 2017 05:52:00 GMT

Unfortunately, this is not the filters. You can see on the picture, I surrounded all the active tools in red.
There is no way to reactivate the original tool bank?

There is no way to take possession of my remote station?

I like it when the files are local in the computer and not on a cloud ....

Thank you for your time !

Re: Tool list

cayerpa — Wed, 30 Aug 2017 05:53:41 GMT

Unfortunately, this is not the filters. You can see on the picture, I surrounded all the active tools in red.
There is no way to reactivate the original tool bank?

There is no way to take possession of my remote station?

I like it when the files are local in the computer and not on a cloud ....

Thank you for your time !

Re: Tool list

masa.minohara — Wed, 30 Aug 2017 06:03:49 GMT

Have you checked the Sample libraries?

Re: Tool list

cayerpa — Wed, 30 Aug 2017 06:25:27 GMT

It is a bit annoying ... I activated the hooks and I did not press the words for example "inch-Aluminum" ... By clicking on the words, everything works. Thank you for guiding me and I greatly appreciate the small video, it will help me to create my tool banks.

Thank you very much.

Patrick:smileyhappy: