topic Re: Cannot expand two concentric circles in Fusion Support Forum

Cannot expand two concentric circles

Anonymous — Wed, 27 Sep 2017 08:13:13 GMT

Hi *,

this is probably a very basic user question but I am a bit confused here:

a) I have sketched two concentric circles (left side) - I expanded them in order to get a 3d object - all good.

b) I have created a second pair of concentric circles in the same sketch (right side). I tried to expend but I cannot select the area between the two circles which I would like to expand. It does allow to select the separate lines of the circles - but that is not what I intend to do...

Pls. advice what my issue might be and what I could do to get things solved. Thanks!

Best regards,

Alex

Re: Cannot expand two concentric circles

ahreum.ryu — Wed, 27 Sep 2017 08:39:33 GMT

Hi @Anonymous

Welcome to the Fusion 360!

It's supposed to extend but I don't get it why. would you mind sharing your design?? Here is how to share your design

I look forward to your reply

Many thanks,

Ahreum.

Re: Cannot expand two concentric circles

Anonymous — Thu, 05 Oct 2017 09:26:01 GMT

Hi Ahreum,

thanks for your help!

pls. check the link: http://a360.co/2yamGY7

You will have to download it since I think you cannot see the issue online, since it is in the sketch 😞

In case you need further details to get me startet, pls. don’t hesitate!

Best regards & many thanks,

Alex

Re: Cannot expand two concentric circles

ahreum.ryu — Fri, 06 Oct 2017 02:49:06 GMT

Hi @Anonymous,

Thank you for sharing your file

However, I was unable to download your file for some reason. It was supposed to show the download button on the right side.

Could you share your design after downloading??

I look forward to your reply

Many thanks,

Ahreum.

Re: Cannot expand two concentric circles

Anonymous — Sat, 07 Oct 2017 13:42:22 GMT

Hey Ahreum,

sorry for the trouble. I hope that I have exported the correct file type?

BTW: I do mean "extrude" not expand 🙂

Best regards,

Alex

Re: Cannot expand two concentric circles

ahreum.ryu — Tue, 10 Oct 2017 08:39:57 GMT

Hi @Anonymous,

Thank you for waiting

Mm,, I have uploaded your file on my project and it seems that is working well so I suspect of your graphics card or driver.

This is my steps. could you confirm that is correct? http://autode.sk/2ycqHK3

Could you check this option?

1. Graphics driver installed by up to date

2. Limit effect to optimize performance option enables.

I look forward to your reply

Many thanks,

Ahreum.