topic Re: mesh scale not entirely working in Fusion Support Forum

mesh scale not entirely working

DBVieira — Thu, 16 Nov 2017 17:53:20 GMT

After scaling a mesh on CAM the block assumes the original part size.

How to reproduce
1.Open an STL
2.Scale it <1
3.On CAM environment when doing the setup the relative block size assumes the ORIGINAL part size

Re: mesh scale not entirely working

kate.raskauskas — Thu, 16 Nov 2017 18:32:34 GMT

Hey @DBVieira,

Thanks for bringing this to our attention! I've logged this with our developers (ticket CAM-8976).

Re: mesh scale not entirely working

innovatenate — Thu, 16 Nov 2017 19:28:46 GMT

Are you saying that after scaling, the setup doesn't update like in the below screencast?

I've reported this to development via report CAM-8977 for further investigation. For now you may be able to create a new setup, select the body and then copy your toolpaths over to the new setup.

I hope this helps.

Re: mesh scale not entirely working

innovatenate — Thu, 16 Nov 2017 19:29:10 GMT

Doh! @kate.raskauskas beat me to it.

Re: mesh scale not entirely working

DBVieira — Fri, 17 Nov 2017 09:36:27 GMT

more or less...is actually worse

The rotation and scale is compromised on fusion and not only on CAM areas.

The workaround is to export the transformed STL and import again

Re: mesh scale not entirely working

cj.abraham — Mon, 20 Nov 2017 19:07:59 GMT

@DBVieira A body needs to be selected in order for the stock to be properly applied.

Re: mesh scale not entirely working

DBVieira — Tue, 21 Nov 2017 09:11:43 GMT

Have you tried ?Because on mine still doest work.....