topic Re: analysis cross section broken? in Fusion Support Forum

analysis cross section broken?

i-make-robots — Mon, 04 Dec 2017 21:50:21 GMT

loaded my file, looked like this. turned analysis off and back on, still like this. when off things look as expected.

Other alaysies look messed up in a similar fashion.

currently running 2.0.3706 on windows 10.

Re: analysis cross section broken?

James.Youmatz — Mon, 04 Dec 2017 23:03:14 GMT

Woah... I personally haven't seen this before but as you mentioned this doesn't seem right. Do you mind sharing the file with me so that I can take a deeper peek into what might be going on? I'm curious if it happens on my machine with your file, or if its just local to your machine. Also, when you say other analyses - do you mean for this model, or just in any model in general?

Thanks,

Re: analysis cross section broken?

i-make-robots — Tue, 05 Dec 2017 09:53:26 GMT

F360 crashed, recovered but lost an hour of work, and now cross sections are doing this.

http://a360.co/2BAzog6 I will dm the password.

Re: analysis cross section broken?

James.Youmatz — Tue, 05 Dec 2017 15:25:44 GMT

Hi @i-make-robots,

Went to download it, but looks like the download option was disabled

Can you generate another link with the download option turned on?

Thanks,

Re: analysis cross section broken?

i-make-robots — Tue, 05 Dec 2017 18:11:30 GMT

try it again.

Re: analysis cross section broken?

James.Youmatz — Wed, 06 Dec 2017 20:31:14 GMT

Hi @i-make-robots,

Very strange! So on my machine, the section analysis looks normal which leads me to believe its something specific to your environment I currently am on a Mac (with the newest version - I believe we updated since you've posted). I need to test on Windows tomorrow when I am in front of that machine.

I have a few initial thoughts as to what might be happening. The first - what do the lightbulbs look like in your Analysis section? You should only be able to turn on one at a time - is this the case from what you can see? From your photo it almost appears as two analyses are overlapping.

The second is a graphics glitch specific to your environment. Do you have dual graphics cards on the machine? If so, can you right-click the Fusion desktop icon and try running with the non-default card and see if that works?

Thanks,