topic Re: Saving File from one project to Another in Fusion Support Forum

Saving File from one project to Another

suneelmo — Sun, 24 Dec 2017 18:17:09 GMT

Earlier, I could save an assembly file of say a Hyd Cylinder in two separate Projects. But from last update this is not being allowed. This is a big problem coz I used to save such common files across different projects.

Re: Saving File from one project to Another

masa.minohara — Mon, 25 Dec 2017 07:44:09 GMT

Hi @suneelmo,

Thank you for posting! Just to check, are you getting the warning below when you insert a design into another design that is in a different project? If so, this has been a limitation and the inserted design won't be linked. I am not aware of a recent change that affects this.

Re: Saving File from one project to Another

suneelmo — Mon, 25 Dec 2017 03:34:28 GMT

Thx for quick reply. I don't know about this team hub. How do I find out in
which hub I am? How do I switch to team hub?

Re: Saving File from one project to Another

masa.minohara — Mon, 25 Dec 2017 04:37:30 GMT

Thank you for your response! If you have purchased Team Hub license, you can find Switch Hubs option under your name in the top-right corner.

If you have only a personal hub, I recommend that you copy parts to a project and create assembly within that project.

Hopefully that helps!

Re: Saving File from one project to Another

suneelmo — Mon, 25 Dec 2017 07:15:28 GMT

Thx for your quick replies. I cannot see the Team Hub option. The reseller
wo hass sold me is also not accessible since some time else I wud ve bought
this Team Hub. Can you pl give me number of support for Mumbai Region?

Re: Saving File from one project to Another

masa.minohara — Mon, 25 Dec 2017 07:33:52 GMT

Thank you for your response! Just to check, have you purchased Fusion Team or are you planning to purchase one? This is not included in Fusion 360 and I was not able to confirm your license in the internal system.

I can create a support case for you and transfer it to the right team, and they can give you a call. Could you tell me what your request is?

Re: Saving File from one project to Another

masa.minohara — Mon, 25 Dec 2017 07:43:34 GMT

Hi @suneelmo,

I apologize for the confusion but I tested with some more designs and noticed that inserting designs from another project doesn't work even in Team Hub and get the same error. (I think I was doing something wrong...)

So the only way to work around the limitation is to create assembly using designs within the same project.

Again, I'm sorry for the confusion!