STL Issue

pastor.healer — Sat, 06 Jan 2018 05:40:36 GMT

I have a component with a hole in it for a M6 screw

I tried to add an M6 screw to the hole with the threads whereas I could print both at the same time.

In the 3d Print dialog, it tells me to select the component or body and all of it highlights, even the

M6 screw. But the M6 screw doesn't show up in the STL file.

Do I need to make this an assembly first and then send it out ?

Thanks for the support

Re: STL Issue

saito.kh — Sun, 07 Jan 2018 06:08:13 GMT

Hi @pastor.healer,

Thank you for posting in the community!

Can you please try some solutions in the below article and let me know if this helps?

https://knowledge.autodesk.com/support/fusion-360/learn-explore/caas/sfdcarticles/sfdcarticles/How-to-export-multiple-components-and-bodies-as-an-STL-from-Fusion-360.html

If this does not help, would you mind sharing a public link to the model file so that I can take a closer look at this on my end?

Thanks.

topic STL Issue in Fusion Support Forum

STL Issue

Re: STL Issue