https://forums.autodesk.com/t5/fusion-support-forum/sewing-clamp-knurling-export-dxf/m-p/7812673#M181690 <P>Trying to export the clamp design for it to be machined and the only the perimeter cut will export. I cannot get the knurling pattern to export. Is there a step I am missing prior to saving as a DXF?</P> Tue, 27 Feb 2018 14:52:14 GMT kaseyPFDSA 2018-02-27T14:52:14Z https://forums.autodesk.com/t5/fusion-support-forum/sewing-clamp-knurling-export-dxf/m-p/7812673#M181690 <P>Trying to export the clamp design for it to be machined and the only the perimeter cut will export. I cannot get the knurling pattern to export. Is there a step I am missing prior to saving as a DXF?</P> Tue, 27 Feb 2018 14:52:14 GMT https://forums.autodesk.com/t5/fusion-support-forum/sewing-clamp-knurling-export-dxf/m-p/7812673#M181690 kaseyPFDSA 2018-02-27T14:52:14Z https://forums.autodesk.com/t5/fusion-support-forum/sewing-clamp-knurling-export-dxf/m-p/7813593#M181691 <P>Hi&nbsp;<a href="https://forums.autodesk.com/t5/user/viewprofilepage/user-id/5735745">@kaseyPFDSA</a></P> <P>&nbsp;</P> <P>Thanks for posting! DXFs exported from Fusion will only contain the information stored in the sketch that is saved as a DXF - as you certain the knurling pattern is in the same sketch as the perimeter? If not, you may need to project or copy it into the sketch so all the information is contained in one sketch.</P> <P>&nbsp;</P> <P>I hope this helps! If you continue to experience problems, please <A href="https://knowledge.autodesk.com/support/fusion-360/troubleshooting/caas/sfdcarticles/sfdcarticles/How-to-share-a-Fusion-360-design.html" target="_blank">share the Fusion design in which you have observed this behavior</A> with me - I'm happy to have a look.</P> Tue, 27 Feb 2018 20:01:24 GMT https://forums.autodesk.com/t5/fusion-support-forum/sewing-clamp-knurling-export-dxf/m-p/7813593#M181691 paul.clauss 2018-02-27T20:01:24Z