topic 2D Sketch Lines - Viewed as Phantom linetype in Fusion Support Forum

2D Sketch Lines - Viewed as Phantom linetype

dmorse — Mon, 19 Mar 2018 22:18:49 GMT

We have a client who uses Fusion 360 for Patent Drawings. In some instances it is necessary to draw sketch lines on a sketch plane to depict certain in a drawing. When he draws sketch items, and subsequently creates a drawing, the lines show up in the Phantom linetype. He has an associate who tries the same thing, but the linetype shows up as continuous. Is there a setting to change this somewhere, or can you explain why the phantom linetype is displayed?

Re: 2D Sketch Lines - Viewed as Phantom linetype

ahreum.ryu — Tue, 20 Mar 2018 02:54:13 GMT

Hi @dmorse,

Thank you for your posting!

Displaying the phantom line-type is by design so far. Please take a look at this link

I also found this in other thread.

For the initial release, sketch geometry will come in as a phantom linetype with no option to change this. I will forward this request to the team, but unfortunately, in the near term, this setting is fixed

Thank you for your understanding.

Many thanks,

Ahreum.

Re: 2D Sketch Lines - Viewed as Phantom linetype

srhGST — Thu, 19 Dec 2019 15:02:13 GMT

Running into the same issue as original poster today. Has there been any change on this in the last year? Would see it as a good boost to drawing creation functionality to be able to view sketch geometry as other line types.