topic Can not make a solid from a sketch in Fusion Support Forum

Can not make a solid from a sketch

Anonymous — Sat, 31 Mar 2018 01:08:00 GMT

I am new to fusion 360. I am following the tutorials on how to get started from fusion 360 help. For some reason once I have made a sketch, I can pull or extrude the sketch but it seems to be transparent not like a solid even after having stopped sketch. Cam doesn't want to process a transparent object from modeling.

Re: Can not make a solid from a sketch

jhackney1972 — Sat, 31 Mar 2018 02:00:49 GMT

Please post your file so others can troubleshoot it for you. With the file open, select File, Export and save it to your local drive. Then attach it to your post. When you ask a question about your file it always should be attached to your question because the reviewers cannot tell what you have done. I cannot replicate your issue just from your description.

Re: Can not make a solid from a sketch

Anonymous — Thu, 05 Apr 2018 11:03:56 GMT

Thank you very much for your response jhackney1972.

I have found the problem.

I have fixed it through using different settings.

Re: Can not make a solid from a sketch

Anonymous — Thu, 07 Jan 2021 17:06:58 GMT

Hi, can i know how to resolve the problem? I had the same problem too. I cannot make it into solid drawing.

Re: Can not make a solid from a sketch

jeff_strater — Thu, 07 Jan 2021 17:13:54 GMT

if you share the design containing the sketch, we can show you.

Re: Can not make a solid from a sketch

Anonymous — Thu, 07 Jan 2021 17:36:18 GMT

Here, i attached picture of the drawing. It cannot become solid.

Re: Can not make a solid from a sketch

g-andresen — Thu, 07 Jan 2021 17:43:52 GMT

Hi,

1. SURFACE > CREATE > Thicken

2. Maybe : share your file

File > export > save as f3d locally > attach it to the next post.

günther

Re: Can not make a solid from a sketch

Anonymous — Thu, 07 Jan 2021 17:47:11 GMT

This is the file.

Re: Can not make a solid from a sketch

jhackney1972 — Thu, 07 Jan 2021 17:55:48 GMT

If you desire it to be completely solid, take a look at the Screencast. You need to use the Solid Environment not Surface.