topic Measure tool not respecting precision setting in Fusion Support Forum

Measure tool not respecting precision setting

tiktuk — Tue, 24 Apr 2018 04:43:08 GMT

The angle reported is not respecting the precision setting. In the screenshots below I get a reading of 0.3 degrees but after rotation by that amount my component is still off.

Re: Measure tool not respecting precision setting

masa.minohara — Tue, 24 Apr 2018 05:58:11 GMT

Hi @tiktuk,

Thank you for reporting the issue! Could you share a public link to the design with me? I'd like to take a closer look at the issue.

Re: Measure tool not respecting precision setting

tiktuk — Tue, 24 Apr 2018 06:08:02 GMT

Thanks! Here is the link: https://a360.co/2KaCk8C .

Re: Measure tool not respecting precision setting

masa.minohara — Tue, 24 Apr 2018 07:08:49 GMT

Hi @tiktuk,

Thank you for sharing the file with me! I was able to reproduce the issue but I could not figure out why this is happening. I have escalated this to the development team for further investigation. (the ticket ID is FUS-39567)

For now, could you try using the Align command in the Modify menu as a workaround?

Re: Measure tool not respecting precision setting

tiktuk — Tue, 24 Apr 2018 09:03:42 GMT

Cool, thanks and yes, I figured out to use the Align tool ☺️ .