topic Re: Bridge design in Fusion Support Forum

Bridge design

antonio5L2W4 — Tue, 15 May 2018 17:02:13 GMT

Ciao,

perché la funzione Bridge non funziona in questo caso?

Grazie, Antonio.

Re: Bridge design

paul.clauss — Tue, 15 May 2018 20:03:46 GMT

Thanks for posting! This seems like some odd behavior - would you mind sharing the Fusion design in which you observed this problem with me? I'm happy to have a look!

Please let me know if you have any questions.

Re: Bridge design

antonio5L2W4 — Tue, 15 May 2018 20:16:38 GMT

Hi Paul,

thanks for your quick reply.
I attach the file.

Antonio.

Re: Bridge design

paul.clauss — Tue, 15 May 2018 21:26:05 GMT

Hi @antonio5L2W4

Thanks again for posting! The Bridge tool appears to be working correctly on my end - I've shown my process in the screencast below.

I was able to create multiple faces and even a twist in the bridge.

I hope this helps - please let me know if you have any questions.

Re: Bridge design

antonio5L2W4 — Tue, 15 May 2018 22:16:35 GMT

Hi Paul, thanks a lot for the solution and the quick reply.