topic Issues with my drawing environment - creating views and maintaining them in Fusion Support Forum

Issues with my drawing environment - creating views and maintaining them

robpicinic — Thu, 07 Jun 2018 22:22:11 GMT

I have a ongoing issue with generating 2D views and keeping the content to reflect what is in the model

Assembly model of an entire kitchen was assembled with constraints and without constraints

both methods has caused headaches but with constraints have been worse at maintaining the drawings (as well as 3D)

my 3D model looks fine, but when creating a 2D view it doesn't stay consistent (whole) as a view may look good at initial generation, then loading the drawing a few days later something will either go missing or dissapear

not really sure how to explain the pain i go through with this model

it is arguably the largest model i have created to date, and the drawings have been a challenge

Re: Issues with my drawing environment - creating views and maintaining them

masa.minohara — Fri, 08 Jun 2018 01:29:17 GMT

Hi @robpicinic,

Thank you for posting about the issue!

Would you be able to share a public link to the drawing with me? I'd like to take a closer look at it to troubleshoot.

Also, could you attach some screenshots of where you are seeing the issue?

Re: Issues with my drawing environment - creating views and maintaining them

robpicinic — Fri, 08 Jun 2018 02:08:13 GMT

I'm not sure how I can. I'd have to include you to the project to review.

Many references

What is the best way to do this

Re: Issues with my drawing environment - creating views and maintaining them

masa.minohara — Fri, 08 Jun 2018 04:31:41 GMT

Hi @robpicinic,

Thank you for your response! Inviting me to your project is the best way if that is fine by you, and my email address is masanobu.minohara@autodesk.com

You can also "Share public link" by right-clicking on the drawing and then I will be able to download a F3Z file which includes the drawing and all the referenced components.

One more thing, could you post some screenshots of the issue so I may better understand what the issue is?

Please let me know if you have any questions.