topic Re: Posted code doesn't match model geometry in Fusion Support Forum

Posted code doesn't match model geometry

Anonymous — Mon, 18 Jun 2018 22:46:38 GMT

When I generate the toolpath for my model it appears to not match correctly with the 3D model in CAM. In this case it looks like it display's one thing but is cutting something else, beyond the model.

Looking at the slot the toolpath goes beyond the opening of the 3D model when simulating. Did I create the toolpath incorrectly or is this a bug of some sort?

I've also attached the file as most people ask for it...

Thanks for your help.

Adam,

Re: Posted code doesn't match model geometry

Anonymous — Tue, 19 Jun 2018 00:25:05 GMT

This really should read the CAM in Fusion 360 doesn't match the modeling... I've not actually exported the gcode yet..

Re: Posted code doesn't match model geometry

engineguy — Tue, 19 Jun 2018 09:27:44 GMT

Hi @Anonymous

In your image it shows you are using a Face strategy which is the wrong one for cutting the slots, try using either a Slot or Pocket strategy.

Regards

Rob

Re: Posted code doesn't match model geometry

Anonymous — Tue, 19 Jun 2018 09:39:16 GMT

Totally missed that! I overlooked it a few times..

Thanks,