topic Re: How do I add center marks for a hole in drawings in the views that aren't facing out of the page? in Fusion Support Forum https://forums.autodesk.com/t5/fusion-support-forum/how-do-i-add-center-marks-for-a-hole-in-drawings-in-the-views/m-p/12746821#M17211 <P>You will probably need to create a view that's normal to the surface that the holes are on. To do this you need to first create a named view in the modelling environment then you can use this in your drawing. Without a screenshot or the model and drawing it's difficult to give better help.</P> Wed, 01 May 2024 20:06:20 GMT MRWakefield 2024-05-01T20:06:20Z How do I add center marks for a hole in drawings in the views that aren't facing out of the page? https://forums.autodesk.com/t5/fusion-support-forum/how-do-i-add-center-marks-for-a-hole-in-drawings-in-the-views/m-p/12746808#M17210 <P>I'm making a drawing with a hole in one of the views. I added center marks to that hole. However in the other views, the hole is not facing out of the page into the viewer. How do I add the center marks to those holes in the fusion drawing?</P> Wed, 01 May 2024 19:59:48 GMT https://forums.autodesk.com/t5/fusion-support-forum/how-do-i-add-center-marks-for-a-hole-in-drawings-in-the-views/m-p/12746808#M17210 przybyl4 2024-05-01T19:59:48Z Re: How do I add center marks for a hole in drawings in the views that aren't facing out of the page? https://forums.autodesk.com/t5/fusion-support-forum/how-do-i-add-center-marks-for-a-hole-in-drawings-in-the-views/m-p/12746821#M17211 <P>You will probably need to create a view that's normal to the surface that the holes are on. To do this you need to first create a named view in the modelling environment then you can use this in your drawing. Without a screenshot or the model and drawing it's difficult to give better help.</P> Wed, 01 May 2024 20:06:20 GMT https://forums.autodesk.com/t5/fusion-support-forum/how-do-i-add-center-marks-for-a-hole-in-drawings-in-the-views/m-p/12746821#M17211 MRWakefield 2024-05-01T20:06:20Z