topic Re: Drawing dimension text height incorrect in Fusion Support Forum

Drawing dimension text height incorrect

Anonymous — Fri, 27 Jul 2018 14:48:56 GMT

Drawings with limit dimensions are displaying half size compared to single value dimensions. This needs sorting as is it quite confusing and untidy.

Andy B

Re: Drawing dimension text height incorrect

ryan.bales — Fri, 27 Jul 2018 15:08:47 GMT

Hi @Anonymous,

I tested this and can't seem to reproduce it. I think we need @TimeraAutodesk to take a look.

Re: Drawing dimension text height incorrect

Anonymous — Fri, 27 Jul 2018 15:36:56 GMT

Hi Ryan,

Just to advise, I've just tested the issue again on a new drawing and the
issue still exists. Set the tolerance type to limit and the result is text
of reduced size.

Regards,

Andy

[image: new drg.jpg]

Re: Drawing dimension text height incorrect

ryan.bales — Fri, 27 Jul 2018 16:36:45 GMT

I'm just not seeing it, but maybe i'm missing something:

Re: Drawing dimension text height incorrect

HughesTooling — Fri, 27 Jul 2018 16:38:09 GMT

The problem only shows with ISO drawings, ASME the text stays the same size. Don't know if the standard is different for ISO.

Mark

Re: Drawing dimension text height incorrect

ryan.bales — Fri, 27 Jul 2018 16:44:22 GMT

Thanks @HughesTooling, guess its good you are using ISO style!

I see it now and i'm hoping Timera can chime in on this when she gets to it.

Re: Drawing dimension text height incorrect

HughesTooling — Fri, 27 Jul 2018 16:50:30 GMT

I probably should be using the ISO style but there are a few things I don't like about it so use ASME. Wish there were overrides for some things, like I don't know anyone that uses first angle projection. I know it's probably the standard for iso but I think a lot of people override this setting.

Mark

Re: Drawing dimension text height incorrect

Anonymous — Fri, 21 Sep 2018 06:51:21 GMT

Hi Fusion Team,

Any feedback on when this issue will be resolved as it does/will stop ISO drawings being created with clarity?

Regards,

Andy Barnes

Re: Drawing dimension text height incorrect

Anonymous — Fri, 28 Sep 2018 08:36:25 GMT

Hi Ryan,

Did this issue ever get looked at?

Regards,

Andy Barnes

Re: Drawing dimension text height incorrect

Anonymous — Sat, 08 May 2021 12:19:40 GMT

I've just come back to Fusion 360 after a couple of years and I see that this ISO dimension limit text size has still not been addressed! Surely, this is a quick fix?

Andy B