topic Re: Edge display error? in Fusion Support Forum

Edge display error?

alexi_creecy1 — Wed, 15 Aug 2018 23:35:14 GMT

Model displays as having peeling, mesh like, edges with obvious holes along the models perimeter. It seems to be a purely visual display error, as once the file is exported to STL or STEP it's watertight. However I'm not sure if this is poor modelling on my behalf, or a Fusion error.

This model was created with a sculpting mode loft command followed by a number of extrusions and fillets around the edges.

Attached screen shots, one as seen normally, the other in cross-section analysis.

Cant upload the actual file as its for a friends design.

Re: Edge display error?

saito.kh — Thu, 16 Aug 2018 05:04:20 GMT

Hi @alexi_creecy1,

Thank you for posting and welcome to the community!

Sorry to hear that! At this moment I suspect there might be something related to graphics in Fusion with this design.

In order to take a closer look at this, would you mind sharing the design with me? If it is okay with you and your friends, can you please send a public link to the design - see this web page for how to share a design, and send it to me (kanehiko.saito@autodesk.com)?

If you have any questions, please let me know!

Thanks.

Re: Edge display error?

alexi_creecy1 — Fri, 17 Aug 2018 01:02:36 GMT

Thanks for your reply.

Strangely the error seemed to sort itself out, once I added a fillet to a few surrounding edges.

Re: Edge display error?

saito.kh — Fri, 17 Aug 2018 06:06:54 GMT

Hi @alexi_creecy1,

Thank you for the update!

Good to hear it was sorted it out at this time. I do imagine there might be something related to graphics with the geometry. If you can share a design you are experiencing this issue, I would appreciate your sharing it for the further investigation of this!

If you have any questions or concerns, please let me know.

Enjoy Fusion!

Re: Edge display error?

saito.kh — Mon, 20 Aug 2018 12:06:07 GMT

Hi @alexi_creecy1,

Thank you for sharing the design with me!

Sorry to hear this is happening. I suspect there might be a very tiny object in the space.

I will take a look at this on my end (with my colleagues) and get back with you once I have something to share! Thank you for your patience.

Thanks.

Re: Edge display error?

jimmy.wick90 — Mon, 11 Jul 2022 08:10:36 GMT

Clear browsing history and cached data
Clearing this cache will sometimes fix page display problems. If you can open Microsoft Edge, select Settings and more > History > Clear browsing data. Select All time under Time range; select Browsing history and Cached images and files, and then select Clear now.

Jimmy