topic Re: Fusion is getting stuck randomly during simple sketch commands in Fusion Support Forum

Fusion is getting stuck randomly during simple sketch commands

ID01C2PNH — Tue, 07 May 2024 16:32:30 GMT

Fusion is getting stuck during simple sketch commands, during exiting and entering sketches, edit feature command etc.

it gets stuck for minutes and then crashes but sometimes it resumes

i'm attaching a screen recording here you can find the task manager at the end of the video.

It started the past week and i feel like its getting worse now..

Re: Fusion is getting stuck randomly during simple sketch commands

CGBenner — Wed, 08 May 2024 14:10:27 GMT

@ID01C2PNH

Hello and welcome. Has this problem been all with the same file, or with any Fusion design you work on?

Re: Fusion is getting stuck randomly during simple sketch commands

jeff_strater — Thu, 09 May 2024 12:38:09 GMT

please share the this design here. While adding a line may seem "simple", if the sketch itself is very large, the entire sketch solve time can take a very long time. Even adding a "simple" line causes the entire sketch to solve. Most of the time, you can simplify sketches by splitting them into multiple sketches, removing patterns (do the patterns in solid), etc.

Re: Fusion is getting stuck randomly during simple sketch commands

ID01C2PNH — Thu, 09 May 2024 13:51:39 GMT

I'm currently working on two projects both of them are having the issue

Re: Fusion is getting stuck randomly during simple sketch commands

ID01C2PNH — Thu, 09 May 2024 15:46:26 GMT

both are just 4-5 body assembly nothing complex

Re: Fusion is getting stuck randomly during simple sketch commands

ID01C2PNH — Thu, 09 May 2024 14:11:09 GMT

This is the sketch that im working on, an dim using an intal i9 laptop with 16 gb ram and nvidia gforce rtx 4gb gpu,

Cant share the whole design its under nda, please let me know how can we resolve this quickly

Thank you

Re: Fusion is getting stuck randomly during simple sketch commands

jeff_strater — Thu, 09 May 2024 22:36:05 GMT

@ID01C2PNH - can you share just this sketch? That is, if you copy all the geometry in this sketch, and paste it into a new design, do you also see the slowness? If so, then can you share just that design here?

Re: Fusion is getting stuck randomly during simple sketch commands

ID01C2PNH — Fri, 10 May 2024 04:57:40 GMT

I saved the sketch as .dxf and opened it in another window, but now all the constraints and dimensioning are lost

but for the sake of testing it i tried giving it some constraints and did some extrusions its not getting stuck now.

as for the previous design files..it had some unwanted components and bodies so i removed everything and kept just 9 bodies and 6 sketches..its still getting stuck frequently

Re: Fusion is getting stuck randomly during simple sketch commands

ID01C2PNH — Fri, 10 May 2024 05:08:38 GMT

I can send the design to your mail id if it helps solve the problem faster.

Re: Fusion is getting stuck randomly during simple sketch commands

jeff_strater — Fri, 10 May 2024 22:53:51 GMT

yes, you can send it to me at jeff.strater@autodesk.com. But, what I was suggesting was not exporting via DXF (which does strip out constraints and dimensions), but this workflow:

open your design
edit the problem sketch
select all the geometry in that sketch (area select)
Copy
Create a new design
create a new sketch
Paste
Exit sketch
Save

export that design as an F3D, and post it here

Re: Fusion is getting stuck randomly during simple sketch commands

ID01C2PNH — Fri, 17 May 2024 09:30:37 GMT

I've send the whole file via mail to jeff.strater@autodesk.com from saheem@thebluarmor.com

, please check it out and let me know what can be done to rectify this.

also, my fusion ram usage is from 8- 15 GB, is this normal ?

Re: Fusion is getting stuck randomly during simple sketch commands

CGBenner — Fri, 31 May 2024 10:44:26 GMT

@ID01C2PNH @jeff_strater

Hello! Circling back here, has this been resolved?