topic Re: Error: CAM kernel died unexpectedly. in Fusion Support Forum

Error: CAM kernel died unexpectedly.

j2 — Sat, 08 Dec 2018 17:29:18 GMT

Hi,

generating adaptive toolpaths I get very often the message "Error: CAM kernel died unexpectedly.". When I try a few times sometimes it works with the same operation, sometimes not. What can be the issue?

See https://a360.co/2L2SL7z

Regards ... Jörg

Re: Error: CAM kernel died unexpectedly.

masa.minohara — Sun, 09 Dec 2018 23:50:58 GMT

Hi @j2,

Thank you for posting in the forum! I had a look at your design but did not see the error.

Have you edited the design since you posted about the issue?

Re: Error: CAM kernel died unexpectedly.

j2 — Mon, 10 Dec 2018 20:23:06 GMT

Hi Masa,

I fixed it by using pocket. But the problem still persists here:

https://a360.co/2C2VcEo

Regards, Jörg

Re: Error: CAM kernel died unexpectedly.

masa.minohara — Tue, 11 Dec 2018 01:04:02 GMT

Hi @j2,

Thank you for sharing the file with me! I still haven't found the root cause of the issue but I saw a similar issue in this forum thread.

Are you on Mac or Windows?

Re: Error: CAM kernel died unexpectedly.

j2 — Tue, 11 Dec 2018 18:52:08 GMT

I do use the Mac Version of Fusion ....

Re: Error: CAM kernel died unexpectedly.

masa.minohara — Thu, 13 Dec 2018 08:16:15 GMT

Thank you for your response! I have logged the issue with the development team for further investigation. (CAM-12188)

I apologize for the inconvenience, and thank you for bringing this to our attention!