topic Re: View Cube Lock Up Bug in Fusion Support Forum

View Cube Lock Up Bug

2herds — Sat, 22 Dec 2018 14:05:10 GMT

Just wanted to post the View Cube is again locking up. All I had was a 20x20x20 cube in the Model and the cube locked up.

Version 2.0.5119

Using Macbook Pro OS-Mojave

Re: View Cube Lock Up Bug

masa.minohara — Wed, 26 Dec 2018 01:57:11 GMT

Hi @2herds,

Thank you for posting in the forum! I don't have a Mac computer with me and cannot test right now but would you mind recording a screencast of the steps to cause Fusion to hang so I will be able to test as soon as I get back to the office?

Also, if the issue is specific to one design, please share a public link to the design with me.

Re: View Cube Lock Up Bug

2herds — Wed, 26 Dec 2018 17:47:43 GMT

I started a fresh model of a box 50x50x90 mm starting in the XY plane. Then made a tapped hole in it, just anywhere, just to be doing something, so far View Cube still working.

Made an off-set plane -20mm off to one side, then View Cube locked up.

Opened mail to respond to you here in, then went back to Fusion and now View Cube is again working?????

Re: View Cube Lock Up Bug

2herds — Wed, 26 Dec 2018 21:20:01 GMT

Will add another lock up. Was making a sketch XY plane and then made 2 construction lines one horizontal 38.1mm and at its end a 10mm vertical construction line. Stopped Sketch and View Cube locked up.

Re: View Cube Lock Up Bug

2herds — Wed, 26 Dec 2018 21:33:26 GMT

Was making a simple sketch and it locked up again. I hope I did the link to the file ok, 2nd time for me.

https://a360.co/2CAN3qU

Re: View Cube Lock Up Bug

2herds — Wed, 26 Dec 2018 21:34:27 GMT

Wrong file, sorry.

Re: View Cube Lock Up Bug

2herds — Wed, 26 Dec 2018 21:35:43 GMT

Tried again with correct file - I hope.

https://a360.co/2TdNEEG

Re: View Cube Lock Up Bug

masa.minohara — Thu, 27 Dec 2018 01:07:31 GMT

Hi @2herds,

Thank you for sharing the file with me! I'll try to reproduce the issue and look into it.

Just to check, does Fusion hang when you are using View Cube in any other files?

Re: View Cube Lock Up Bug

2herds — Thu, 27 Dec 2018 15:02:33 GMT

Fusion's View Cube has locked up on 2 fresh files, so I feel a file issue is not a problem. The last file posted was fresh and the 1st operation was to (1) sketch, (2) picked XY plane, (3) construction line horizontal to left of origin, (4) at end of line went vertical with second construction line, .... locked up view cube.

Re: View Cube Lock Up Bug

masa.minohara — Fri, 28 Dec 2018 00:41:10 GMT

Hi @2herds,

Thank you for your response! I'll check with the internal folks and circle back here as soon as I have more information.