topic Re: Saving Drawing Document Settings in Fusion Support Forum

Saving Drawing Document Settings

joshua_fynn.wadenpohl — Mon, 27 May 2024 14:50:19 GMT

I searched and couldn't find any advice on this issue.

I want to edit the document settings for the drawing of a part (such as line width, arrow heads etc.). Is there any way to save these settings or setting them as a standard to have them in all drawings?

Thanks in advance

Re: Saving Drawing Document Settings

jhackney1972 — Mon, 27 May 2024 22:25:11 GMT

You can save all your Drawing Document setting by creating a Drawing Template. If you then start your drawing using this template you will have the settings repeated. The only thing is the creation of a Drawing Template can only be done using a Fusion Subscription License. Even it you have someone create one for you, it still cannot be used without having a Subscription License.

Re: Saving Drawing Document Settings

joshua_fynn.wadenpohl — Wed, 29 May 2024 17:22:10 GMT

Thanks for the help! It worked (most of it)!

One last question since that did not work.

I inserted an image to the drawing template something like a logo and placed it in the area box right below but that does not show up in the loaded template when I want to draw something in a built component (but the rest does work, thanks for that!)

Thanks in advance

Re: Saving Drawing Document Settings

jhackney1972 — Wed, 29 May 2024 19:30:26 GMT

I do not know what to tell you, as you can see it is easily done as I show in the video. Be sure you are using a standard graphic format such as JPG or PNG for your image.

(view in My Videos)

Re: Saving Drawing Document Settings

joshua_fynn.wadenpohl — Mon, 03 Jun 2024 14:45:34 GMT

Thanks for taking the time.

Yes, I inserted the image correctly in the template and saved it but (and idk why) it doesn't show up when starting a drawing of a new part.

I tried two image files, one jpg and one png but neither works.

I could screenshot both, the template and the started drawing but its as easy described, haha.

Don't know how I could make it work.