3d pocket clearing flat area detection PROBLEM

bigbrad73 — Fri, 18 Jan 2019 13:21:00 GMT

I have notice since the update that 3d pocket clearing flat area detection is messing up big time since update. So if I have a .375 pocket and I am doing a .25" step down it should do like 2 passes. One at .25" and one at .375". It does like 6 passes. What I think is happening is that its detecting the flats of the whole model and making a step at each height. Even if I contain one flat pocket it still does all of them. turn the flat area detection off and it doesn't do it. This seems to have started since this update. Please help!

Re: 3d pocket clearing flat area detection PROBLEM

karina.harper — Fri, 18 Jan 2019 21:32:45 GMT

Hi @bigbrad73

Thanks for posting on the forums. I understand you're having some issues with a 3D pocket clearing operation.

Can you share your file with me so I can take a look?

Here are some instructions on how to share a file:

https://knowledge.autodesk.com/support/fusion-360/troubleshooting/caas/sfdcarticles/sfdcarticles/How-to-share-a-Fusion-360-design.html

topic Re: 3d pocket clearing flat area detection PROBLEM in Fusion Support Forum

3d pocket clearing flat area detection PROBLEM

Re: 3d pocket clearing flat area detection PROBLEM