topic Re: Fusion 360 on Windows on ARM in 2024 in Fusion Support Forum

Fusion 360 on Windows on ARM in 2024

kubaslovacekk75625 — Wed, 29 May 2024 08:15:56 GMT

Hello. Any news to fusion on Windows on ARM in second half of 2024? Also will fusion360 will be supportet natively from snapdragon x release lets say in second half of 2024 OR will be suported by windows on arm translation layer wich we will se also in second half 2024? Thank you in advance for any update on this topc. Best regards, Jakub

Re: Fusion 360 on Windows on ARM in 2024

CGBenner — Wed, 29 May 2024 10:58:57 GMT

@kubaslovacekk75625

Welcome to the Community. For a chance to see what may be coming in future releases of Fusion, I suggest looking at the Fusion Insiders Group. Good luck!

Re: Fusion 360 on Windows on ARM in 2024

lance.carocci — Mon, 03 Jun 2024 15:55:15 GMT

Fusion already runs on Windows 11 on ARM64 via the existing XtaJIT64 translation layer available - you do not need to wait for Prism.

That said, Fusion has not yet been certified nor fully tested with Windows on ARM by Autodesk, so I personally cannot yet recommend ARM64 Windows devices for mission-critical work as of writing.

Re: Fusion 360 on Windows on ARM in 2024

kubaslovacekk75625 — Tue, 04 Jun 2024 06:18:59 GMT

Hi, Thank you for your reply. It was helpful 🙂

Re: Fusion 360 on Windows on ARM in 2024

jeppe_ersgaa — Thu, 22 Aug 2024 06:44:22 GMT

Is there any performance difference between fusion running on windows 10 and windows 11 on arm64, I’m asking because I need fusion for school and I’m considering a laptop with an arm chip because of battery life but if it can’t run fusion it’s a deal breaker

Pre thanks

Re: Fusion 360 on Windows on ARM in 2024

lance.carocci — Thu, 22 Aug 2024 14:41:42 GMT

@jeppe_ersgaa are you asking about Win 10 x86_64 and Win 11 ARM64? You cannot get a new ARM device with Windows 10, and it does not have the x86_64 compatibility layer in any case, but I just wanted to confirm.

If you are eager to run Fusion on ARM64 Windows, it will run. However, we are not testing and certifying for this platform just yet, so in the event you encounter any bugs as a result of running on the compatibility layer, there won't be much we can do to help in the short term.

Re: Fusion 360 on Windows on ARM in 2024

Fabriziocopp — Sun, 24 Nov 2024 22:43:26 GMT

Any news about an ARM build? Is this in developing phase /thinking phase ?

Re: Fusion 360 on Windows on ARM in 2024

lance.carocci — Mon, 25 Nov 2024 17:21:10 GMT

No updates to share at this time. That said, these are the types of things that would be first announced under NDA to our Insider program, which anyone with a Fusion license can join. If you want to be among the first to hear about these sorts of things, please consider joining the program.

Re: Fusion 360 on Windows on ARM in 2024

leo3 — Sun, 15 Dec 2024 10:51:57 GMT

Good day any news about ARM version for w11 ? Thanks