topic Re: Sketcher dimensioning/constraining not working in Fusion Support Forum

Sketcher dimensioning/constraining not working

Noah_Katz — Thu, 31 Jan 2019 06:01:39 GMT

As seen in the screencast (sorry I forgot to turn the speakers off), dimensioning/constraining has gone wacky.

When I first created the line I tried to dimension at .375, it was OK.

When I added another dimension, the .375 changed itself to .203 and I can't fix it.

The original extrude feature is yellow because I copied and pasted the component into a new design to keep the file small.

rohit.bapat — Thu, 31 Jan 2019 09:24:57 GMT

Sorry to know that you are facing this problem. I can reproduce the problem and I have created a ticket FUS-46692 to track the issue.

Thank you,

Best Regards

Rohit Bapat

Noah_Katz — Thu, 31 Jan 2019 16:03:51 GMT

Thanks for the quick response @rohit.bapat

I suppose a quick fix for something like this isn't likely - right?

rohit.bapat — Wed, 06 Feb 2019 04:49:20 GMT

Sorry for the delay in response. I have forwarded the ticket to the dev team. So far we haven't found any workaround for it.

Thank you,

Best Regards

Rohit Bapat

Noah_Katz — Wed, 06 Feb 2019 05:52:13 GMT

ok thx