topic Re: [BUG] Pin slot joint turns yellow when it should not. in Fusion Support Forum

[BUG] Pin slot joint turns yellow when it should not.

TrippyLighting — Sat, 02 Mar 2019 13:12:28 GMT

When creating this pin slot joint it seems fine, but as soon as I accept with OK it creates a warning message.

The joint does seem to function properly, however.

I discovered tis behavior helping another user in their design in this thread.

That user states that atet 18 months he still hates joints in Fusion 360. One wonders why!

Re: [BUG] Pin slot joint turns yellow when it should not.

davebYYPCU — Sat, 02 Mar 2019 20:04:07 GMT

I too was working in the other thread, took some common sense to ignore it after a while, as both Joints working, have yellow icons. I did not rebuild the assembly from scratch, in my work.

Re: [BUG] Pin slot joint turns yellow when it should not.

jeff_strater — Sat, 02 Mar 2019 21:09:03 GMT

@TrippyLighting , thanks. I'll take a look at this and see what we can find. Thanks for reporting it, and narrowing down the case for us.

Re: [BUG] Pin slot joint turns yellow when it should not.

TrippyLighting — Sun, 03 Mar 2019 00:18:40 GMT

Thanks!

Re: [BUG] Pin slot joint turns yellow when it should not.

jeff_strater — Sun, 03 Mar 2019 23:59:52 GMT

Created FUS-47602 for this. It is strange that it fails out of the gate like that. I wonder if the error is misleading as to the cause of the problem.

I did notice that if I Revert the component positions in this design, and use As-Built joint, I can create the same joint OK. Still not 100% sure that the motion is correct, but we don't get the warning.

Re: [BUG] Pin slot joint turns yellow when it should not.

rishabh.bisht — Sun, 29 Sep 2019 06:12:28 GMT

Hi @TrippyLighting, thanks for sharing this!
We reworked the internals of Joints and deployed a fix for this in the September update. Please feel free to report back if you can still reproduce it.