topic Re: FIXED: Error: Unresolved Components in Assembly after March Update in Fusion Support Forum

FIXED: Error: Unresolved Components in Assembly after March Update

James.Youmatz — Thu, 14 Mar 2019 16:30:09 GMT

Hi all,

We have recently become aware of an issue when opening an assembly with linked (XREF'd) parts, that it may throw an error saying "Error: This Document may contain Unresolved Components" and the assembly links and components are broken.

In this event DO NOT SAVE THE DESIGN and DO NOT PROMOTE PREVIOUS VERSIONS OF THE DESIGN. In doing so, the links may be broken, and as a result, a previous version will have to be promoted after the fix is deployed to restore the links.

We are working very diligently to solve this issue and post a fix within 24 hours. As soon as it is released I will update this post.

Thanks,

Re: Error: Unresolved Components in Assembly after March Update

works_camera — Wed, 13 Mar 2019 18:35:41 GMT

Thanks for letting us know. This is a serious issue for me, as it has ground the design process to a halt.

Re: Error: Unresolved Components in Assembly after March Update

j.hancock01 — Thu, 14 Mar 2019 07:08:23 GMT

Hi James,

Thank you for your post and the great work you and the team are doing. I've also seen the "unresolved component" error message. I think this error could also be the root-cause of the odd appearance of a linked subassembly that I posted about yesterday. I was in the process of trying to re-build a model as I'd got the unresoved component error when the error in the link below occurred:

https://forums.autodesk.com/t5/fusion-360-support/imported-component-different-from-original-component-with-large/m-p/8657277#M49453

Good luck with your work fixing the issue. I'm sure we're all looking forward to hear about the fix.

Many thanks

Jon

Re: Error: Unresolved Components in Assembly after March Update

michael55SE4 — Thu, 14 Mar 2019 13:19:52 GMT

Thanks for letting us know you're working on it. Bugs happen in software, and when they do I appreciate that you guys acknowledged the problem and are working to fix it.

Unfortunately I've been unable to work on my project yesterday, and presumably all day today, so I hope you find a solution soon!

Re: Error: Unresolved Components in Assembly after March Update

michael55SE4 — Thu, 14 Mar 2019 13:27:48 GMT

I was hoping to work on different projects today, but apparently every single model in my repository is giving this error 😞 No idea what's causing it, but my models all use a variety of parts that are referenced.

Guess I'll read a book?

Re: Error: Unresolved Components in Assembly after March Update

Anonymous — Thu, 14 Mar 2019 14:03:41 GMT

Im also having this issue since I updated to the latest version this morning. A quick fix would be greatly appreciated!

Re: Error: Unresolved Components in Assembly after March Update

Anonymous — Thu, 14 Mar 2019 14:54:39 GMT

Thank you for your attention in fixing this major bug. Do you have any updates on the status of a new release? Many of us are not able to work on our projects because of this bug.

Re: Error: Unresolved Components in Assembly after March Update

rcsun — Thu, 14 Mar 2019 15:19:08 GMT

Yeah this is a major bug that needs to be fixed immediately. I cant believe its been almost 24 hours and nothing yet. I've been at a complete standstill, not about to go rebuild an assembly that has over 150 parts.

Re: Error: Unresolved Components in Assembly after March Update

jeff_strater — Thu, 14 Mar 2019 15:31:31 GMT

We are planning to release an update with a fix to this today. This is our highest priority, and we will get it out as soon as we can. We apologize that it has taken so long to get the fix released.

Re: Error: Unresolved Components in Assembly after March Update

jeff_strater — Thu, 14 Mar 2019 15:48:59 GMT

just got word - the fix is out. If you exit and re-start Fusion you will get the update. We apologize for the disruption.

Re: Error: Unresolved Components in Assembly after March Update

rcsun — Thu, 14 Mar 2019 16:05:03 GMT

Great! That was a painful 24 hours. To prevent these kind of things in the future, is there any way to optionally roll back the software update until the fix is implemented?

Re: Error: Unresolved Components in Assembly after March Update

kamolc_hg — Fri, 15 Mar 2019 01:46:26 GMT

After March 13 update, the problem still occur to my work.

Re: Error: Unresolved Components in Assembly after March Update

m_maursundFZNS2 — Fri, 15 Mar 2019 08:05:21 GMT

I still have the issue.

Update:

Looks like the issue is solved now.

Martin

Re: Error: Unresolved Components in Assembly after March Update

maximilian.lacher — Fri, 15 Mar 2019 10:02:01 GMT

Have not seen the issue in the past, but after the latest update we now receive the same issue

@m_maursundFZNS2 wrote:

I still have the issue.

Update:

Looks like the issue is solved now.

Martin

Re: FIXED: Error: Unresolved Components in Assembly after March Update

stiller.design — Mon, 18 Mar 2019 12:04:18 GMT

the issue is still not solved, is it?

Re: FIXED: Error: Unresolved Components in Assembly after March Update

James.Youmatz — Mon, 18 Mar 2019 12:18:29 GMT

Hi @stiller.design,

It should be fully resolved after the hot fix we deployed last week. Can you confirm you are on version 2.0.5511? To confirm, click the Help menu of Fusion in the top-right corner and select About.

Thanks,

Re: FIXED: Error: Unresolved Components in Assembly after March Update

j.hancock01 — Mon, 18 Mar 2019 12:20:44 GMT

I found I needed to "refresh" the models I was working with in order to completely get rid of the problem. This is described in step 2 of the solution to another related problem I was having:

https://forums.autodesk.com/t5/fusion-360-support/imported-component-different-from-original-component-with-large/td-p/8656819

Re: FIXED: Error: Unresolved Components in Assembly after March Update

mjoconr — Mon, 18 Mar 2019 12:44:51 GMT

I'm dealing with issues where models which where not save are now damaged, so I think there is still some sort of issue but what is up for investigation.

I have a model which is being looked at by people at Autodesk.

Re: FIXED: Error: Unresolved Components in Assembly after March Update

stiller.design — Mon, 18 Mar 2019 15:07:36 GMT

Hi James, thanks for your reply, Yes I on the latest version, the same you mentioned.

I also get lots of error messages opening a drawing. For 1 drawing I open I get 6 error messages

shall I open a new thread for that?

Re: FIXED: Error: Unresolved Components in Assembly after March Update

James.Youmatz — Mon, 18 Mar 2019 16:11:23 GMT

Hi @stiller.design ,

I would. This seems different and I'd like to make sure we capture that correctly.

Thanks,