topic Re: Cann ot post in Fusion Support Forum

Cann ot post

jrogers80 — Tue, 19 Mar 2019 12:58:52 GMT

Hello everyone, I am new to fusion and i can not get my first project to post. I keep getting a error. my tool path runs but obviously i have done something wrong. This is quite frustrating and i would prefer someone to talk this over with but fusion does not have support like that. any help would be appreciated.

Re: Cann ot post

julia.paganucci — Tue, 19 Mar 2019 14:20:00 GMT

Hi @jrogers80 ,

thanks for posting! Can you please post a screenshot of the error you are receiving? It would also be great for me to take a look at your file. What machine post are you using?

Thanks,

Re: Cann ot post

jrogers80 — Tue, 19 Mar 2019 18:36:45 GMT

Attached is as screenshot of the error message.

Re: Cann ot post

julia.paganucci — Tue, 19 Mar 2019 20:42:52 GMT

Hi @jrogers80 ,

no screenshot was attached. can you also attach your file and let me know what post processor you are using?

Thanks!

Re: Cann ot post

jrogers80 — Fri, 22 Mar 2019 13:12:58 GMT

Here is a screen shot of the error msg. And also the file that i am trying to engrave on. The holes and contour are for reference only. I just want to engrave the V8 symbol. The machine is a Haas vf2 with a updated control.

Re: Cann ot post

karina.harper — Fri, 22 Mar 2019 20:21:31 GMT

@jrogers80

If you're replying via e-mail, you can't attach images. You'll need to navigate to the forum thread and reply in your browser.

Cheers,

Karina

Re: Cann ot post

jrogers80 — Mon, 25 Mar 2019 13:29:47 GMT

I am trying to post a trace tool path so i can use it on a vf2 haas mill. I am sure that i have done something wrong since i am new to Fusion but here is a screen shot of the error msg but i can not find where the file is located to post it in here for you to look at. i can see it in Fusion but i do not know how to show it to you.

Re: Cann ot post

julia.paganucci — Mon, 25 Mar 2019 13:49:28 GMT

Hi @jrogers80 ,

Thanks for the screenshot! It looks like you are getting an error mentioned in this article here.

To export your file follow these directions (file>export and save to your computer as .f3d) or you can share a public link of your design.

Thanks,

Re: Cann ot post

jrogers80 — Mon, 25 Mar 2019 15:38:50 GMT

Thank you for the export help. here is the file. As i said before, the holes and the outside radi are for reference only. I only want to engrave the "V8" on my part, I have the part finished except for the engraving. It runs in the simulate mode.

Re: Cann ot post

julia.paganucci — Mon, 25 Mar 2019 20:42:45 GMT

Hi @jrogers80 ,

I opened your file and there was no part or setup inside the file was this the correct fusion design file?

Thanks,

Re: Cann ot post

jrogers80 — Wed, 27 Mar 2019 13:50:03 GMT

Thank you for all of your help I finally got my file to post. There was no wcs in the setup and i fixed the tool orientation which fixed my problem. Thank you again and as I am new to fusion I am sure that I will have more problems and questions.