topic Re: Angled threads in Fusion Support Forum

Angled threads

Anonymous — Wed, 10 Apr 2019 12:28:11 GMT

Hi there,

Whenever I try to shift my cylinder to an angle, in my case 25Degrees, my thread on the interior stays in place and does not shift along. How do I get the thread to shift along? The thread needs to be modeled since it's going to be 3D printed.

Thanks.

Re: Angled threads

pawel.potyrala — Wed, 10 Apr 2019 12:42:48 GMT

Hi @Anonymous,

welcome to the Fusion 360 Community Forum. Thanks for posting!

While I don't see the timeline of your design or the model itself (you may attach the link to the post: How to share a Fusion 360 Design) It seems like you only selected the outer cylinder to be shifted to an angle. Try selecting the body/face the thread feature is applied to along with it:

Let me know if that helps. Thanks!

Best regards,

Re: Angled threads

Anonymous — Wed, 10 Apr 2019 14:00:38 GMT

Hi Pawel,
Yes this helped, thank you for helping me solve this problem.

@pawel.potyrala wrote:

Hi @Anonymous,

welcome to the Fusion 360 Community Forum. Thanks for posting!

While I don't see the timeline of your design or the model itself (you may attach the link to the post: How to share a Fusion 360 Design) It seems like you only selected the outer cylinder to be shifted to an angle. Try selecting the body/face the thread feature is applied to along with it:

Let me know if that helps. Thanks!

Best regards,