https://forums.autodesk.com/t5/fusion-support-forum/lead-outs-bad-since-last-update/m-p/8726959#M150188 <P>Heads-up; An update JUST went live that should address this issue. Test carefully and let us know if it still persists.</P> <P>Thanks for your patience!</P> Fri, 12 Apr 2019 16:23:18 GMT seth.madore 2019-04-12T16:23:18Z https://forums.autodesk.com/t5/fusion-support-forum/lead-outs-bad-since-last-update/m-p/8726926#M150187 <P>The lead out toolpath is now processing back to the exact point of the lead in no matter where its at. When boring the OD of a cylinder,&nbsp; if the leadout ends on the other side of the part, the toolpath will travel THROUGH THE PART to get back to lead in position.&nbsp; We've tried this on multiple parts.??</P> Fri, 12 Apr 2019 16:14:29 GMT https://forums.autodesk.com/t5/fusion-support-forum/lead-outs-bad-since-last-update/m-p/8726926#M150187 HorizonHydraulics 2019-04-12T16:14:29Z https://forums.autodesk.com/t5/fusion-support-forum/lead-outs-bad-since-last-update/m-p/8726959#M150188 <P>Heads-up; An update JUST went live that should address this issue. Test carefully and let us know if it still persists.</P> <P>Thanks for your patience!</P> Fri, 12 Apr 2019 16:23:18 GMT https://forums.autodesk.com/t5/fusion-support-forum/lead-outs-bad-since-last-update/m-p/8726959#M150188 seth.madore 2019-04-12T16:23:18Z