topic Re: BUG: Boundary Fill. in Fusion Support Forum

BUG: Boundary Fill.

HughesTooling — Fri, 14 Jun 2024 13:11:46 GMT

@Phil.E Found another bug working with a component moved using a joint.

Here you can see I've positioned component1 with a joint.

If I then try using boundary fill in component2 it looks good in the preview

But when I click OK I get the whole part.

But if I position the second component to the same as the first it works OK.

File's attached. Just delete the second joint and you'll see the problem.

Thanks Mark

Re: BUG: Boundary Fill.

Phil.E — Fri, 14 Jun 2024 14:09:34 GMT

Thanks, I'll ask the QA for boundary fill to take a look.

Re: BUG: Boundary Fill.

samuel.templeUCPAE — Fri, 28 Jun 2024 14:02:52 GMT

Hello @HughesTooling

I do apologise for the rather long delay in getting back to you on this matter. I am currently looking into this issue and will let my development team know of my findings.
Thank you for finding this issue and reporting it to us. We really do appreciate all of your help, on this post and all the other posts you have contributed to.

Thank you

Re: BUG: Boundary Fill.

HughesTooling — Fri, 28 Jun 2024 14:16:53 GMT

@samuel.templeUCPAE Thank you for looking into this.

I've found another situation where boundary fill if failing using copied components.

I wanted to machine some soft jaws in the manufacture workspace and needed a copy of the jaws for the stock model. I found I can create a copy of any one component but can't copy all 3 at one go.

So this looks OK but fails and only gives you one body and a warning. See attached file. This will work with bodies but I needed components to create an assembly.

Re: BUG: Boundary Fill.

samuel.templeUCPAE — Mon, 01 Jul 2024 13:17:26 GMT

Hello @HughesTooling

Thank you again.
Could you possibly send me a screen recording of both workflows if possible?
Its just to make it easy to reproduce the issues.

Re: BUG: Boundary Fill.

HughesTooling — Tue, 02 Jul 2024 11:32:39 GMT

@samuel.templeUCPAE wrote:

Hello @HughesTooling

Thank you again.
Could you possibly send me a screen recording of both workflows if possible?

@samuel.templeUCPAE Sorry don't have any recording software.

It is quite easy to reproduce the problem with my file. Just delete the combine from the timeline, then create a new combine and select a the 3 rectangular bodies as the tools, then select each one as the cells. This should create 3 copied bodies but you will only get one and the combine in the timeline will have an error.

This should work and does if you only pattern bodies but I needed to use a component pattern for my assembly.