https://forums.autodesk.com/t5/fusion-support-forum/panel-split-lines/m-p/12845593#M14835 <P>Hello,&nbsp;<BR />I have been trying to create organic forms with a consistent wall thickness, using multiple separate panels. I have been trying to create the split lines for these panels using a surface to cut through the object, however given the surface is not perpendicular to the form there is a section of wall clearly visible from the exterior. Is there a method in which I can create a surface that is perpendicular to the overall form at every intersection?&nbsp;<BR /><BR />Any help would be greatly appreciated</P><P>I have attached the working file.&nbsp;</P><P>Thank you</P> Tue, 18 Jun 2024 02:31:29 GMT chawl017 2024-06-18T02:31:29Z https://forums.autodesk.com/t5/fusion-support-forum/panel-split-lines/m-p/12845593#M14835 <P>Hello,&nbsp;<BR />I have been trying to create organic forms with a consistent wall thickness, using multiple separate panels. I have been trying to create the split lines for these panels using a surface to cut through the object, however given the surface is not perpendicular to the form there is a section of wall clearly visible from the exterior. Is there a method in which I can create a surface that is perpendicular to the overall form at every intersection?&nbsp;<BR /><BR />Any help would be greatly appreciated</P><P>I have attached the working file.&nbsp;</P><P>Thank you</P> Tue, 18 Jun 2024 02:31:29 GMT https://forums.autodesk.com/t5/fusion-support-forum/panel-split-lines/m-p/12845593#M14835 chawl017 2024-06-18T02:31:29Z