topic Re: Precise Modify in Fusion Support Forum

Precise Modify

Anonymous — Tue, 28 May 2019 13:51:05 GMT

Good day,

I do not understand how can i Precisely modify faces or edges by extruding or doing other actions. For example, when i do Press Hull, i can modify distance only by 10mm, however i want it to be precious as 0.0001mm, 0.0002mm, 0.0003mm and etc.

You can find attached file, that shows you increasing value only by 10.00 mm.

Also when i do fillet it changes value by 5.00 mm. I want it changes for MORE PRECISE VALUE!

I have start up license by the way.
Thank you in advance!!

Re: Precise Modify

James.Youmatz — Tue, 28 May 2019 13:57:19 GMT

Hi @Anonymous ,

The drag tool is based adaptively on how zoomed in you are (i.e. that is why it is going by 10mm increments). If you want a precise number you can manually type the number in the dialog:

Re: Precise Modify

Anonymous — Tue, 28 May 2019 14:06:43 GMT

I have seen how people can modify it very precise, so if you say that the zoom is problem, how can i change it?

Re: Precise Modify

Anonymous — Tue, 28 May 2019 14:11:07 GMT

I need this value could be changed with arrows automatically, i have seen many people can modify it with an arrows, they did not typed it manually

Re: Precise Modify

Anonymous — Tue, 28 May 2019 14:13:15 GMT

I have changed zoom, it does not work, now it changes by 1000 mm.

Screenshot is attached

Re: Precise Modify

James.Youmatz — Tue, 28 May 2019 14:13:45 GMT

Hi @Anonymous ,

Then you need to zoom way way in. If you zoom in closer to the actual face that you are extruding (you will have to be super close for .001 moves) - you will notice the value changes when dragging.

Re: Precise Modify

HughesTooling — Tue, 28 May 2019 14:14:19 GMT

Is incremental move unchecked? Also are the other snaps unchecked?

Mark

Re: Precise Modify

Anonymous — Tue, 28 May 2019 14:33:11 GMT

Thank you Very much it helped me SO MUCH!!