topic F360 takes a long time to perform an action in Fusion Support Forum

F360 takes a long time to perform an action

andre_m_za — Tue, 04 Jun 2019 09:25:31 GMT

When I make slots, there are certain areas on the drawing sheet where you cannot draw a slot. I have drawn slots around this specific area and when I try to draw a slot nearby it shows that it is working. It has been trying to draw the slot now for 4 hours and nothing. See below screenshot

Betreff: F360 takes a long time to perform an action

g-andresen — Tue, 04 Jun 2019 09:33:39 GMT

Hi,

create the slot at any location and place it in position with dimensions and constraints.

Tipp: create a screencast and/or share your design.

günther

Re: F360 takes a long time to perform an action

HughesTooling — Tue, 04 Jun 2019 12:14:47 GMT

Looking at your sketch it looks like there are a lot of constraints, sketches with hundreds of constraints are not a good idea. Keep sketches as simple as possible, use several sketches rather than overloading Fusion trying to create everything in one sketch. Export your design as an f3d and atach for more advice.

Mark