topic Re: Can no longer snap to geometry when drawing a sketch in Fusion Support Forum

Can no longer snap to geometry when drawing a sketch

Anonymous — Wed, 05 Jun 2019 19:05:37 GMT

I've found that I can no longer snap to external geometry that is not perfectly flush with a sketch plane. I relied heavily on this feature since I often find myself using existing components in the project as a reference when drawing new sketches. Using the "Include 3D Geometry" tool is not suitable for this task because snapping still doesn't work as long as the lines are not flush with the sketch plane.

EDIT: Huh, turns out that the "Project" tool works. Bit of a roundabout and inefficient way of doing things, though.

Re: Can no longer snap to geometry when drawing a sketch

jeff_strater — Wed, 05 Jun 2019 23:46:54 GMT

@Anonymous - can you check the state of the "auto project edges on reference" preference in the Design tab?

I suspect that this has gotten un-checked, and that if you turn it on, you will again get the behavior that I think you want.

Re: Can no longer snap to geometry when drawing a sketch

Anonymous — Thu, 06 Jun 2019 00:47:37 GMT

Yeah, the setting had been unchecked. No idea why, I've never even touched that tab.

Re: Can no longer snap to geometry when drawing a sketch

Anonymous — Mon, 10 Jun 2019 03:58:10 GMT

Same same. Certainly never unchecked this one. It's an update thing for sure.

Re: Can no longer snap to geometry when drawing a sketch

HughesTooling — Mon, 10 Jun 2019 07:40:55 GMT

Think the last update changed to have that setting default to off. Perhaps it shouldn't have changed existing installs, but most experienced users turn it off because you end up with a lot of unneeded projections with it on.

Mark

Re: Can no longer snap to geometry when drawing a sketch

ViewingSoftware — Wed, 21 Oct 2020 16:51:48 GMT

Hi there, I am trying to draw a perpendicular line between two curves but I cannot get the line tool to snap to either of the curves.

The curve line and the curve profile do not appear to be aligned and the line tool is snapping to the curve profile rather than the curve line. But obviously, snapping to the profile does not create closed geometry. Below are two screen grabs - the first shows where the line tool wants to snap to and the second shows the mis-aligned profile.

Any assistance would be hugely appreciated - driving me nuts!

Re: Can no longer snap to geometry when drawing a sketch

g-andresen — Wed, 21 Oct 2020 16:55:35 GMT

Hi,

please share your file

File > export > save as f3d locally > attach it to the next post.

günther