topic Re: Base view is being cropped on a new drawing in Fusion Support Forum

Base view is being cropped on a new drawing

geomonkey79 — Wed, 09 Apr 2025 09:32:00 GMT

Hi Team,

I'm trying to create a drawing of a specialty bolt. Every time I add the part using the Base View command, the part is shown cropped.

Anyone else experiencing this problem? Or is there something I'm missing. I've installed the latest version of Fusion 360, restarted my PC.

Re: Base view is being cropped on a new drawing

geomonkey79 — Wed, 09 Apr 2025 10:00:09 GMT

Here is a copy of the fusion 360 file that is causing the problem

Re: Base view is being cropped on a new drawing

jhackney1972 — Wed, 09 Apr 2025 16:49:09 GMT

It would seem that a couple of your Fillets were corrupt. A model is attached that will create a 2D Drawing.

Re: Base view is being cropped on a new drawing

geomonkey79 — Thu, 10 Apr 2025 01:02:42 GMT

@jhackney1972 You are a scholar and a gentleman! Thank you. I was at a loss as to why this was happening, thank you! Can I ask how you debugged the problem?

Re: Base view is being cropped on a new drawing

jhackney1972 — Thu, 10 Apr 2025 02:24:09 GMT

I moved the end of part marker back in the Timeline until it did not fail then moved it ahead one step at a time until the drawing failed. That will tell you the offending features. The Timeline is a wonderful tool.

Re: Base view is being cropped on a new drawing

geomonkey79 — Thu, 10 Apr 2025 02:32:43 GMT

Thanks for the tip. Its greatly appreciated