topic Betreff: problem creating a flange in Fusion Support Forum

problem creating a flange

Anonymous — Tue, 25 Jun 2019 10:38:49 GMT

I am trying to create a flange as shown and i want to use that line as a guide, but i can not select it for some reason.

Betreff: problem creating a flange

g-andresen — Tue, 25 Jun 2019 11:03:01 GMT

Hi Karl,

Please upload* your file and mark the elements you want to use.

günther

*File > export > save as f3d locally > attach it to the next post.

Betreff: problem creating a flange

Anonymous — Tue, 25 Jun 2019 11:36:43 GMT

For some reason i can only export it as an .f3z file. Will that be ok?

Betreff: problem creating a flange

g-andresen — Tue, 25 Jun 2019 11:57:35 GMT

better than nothing!

Betreff: problem creating a flange

Anonymous — Tue, 25 Jun 2019 12:19:52 GMT

I can not post that design for some reason. I made a new design with the same problem.

Re: problem creating a flange

Anonymous — Tue, 25 Jun 2019 12:32:12 GMT

I just found the problem. The line was not 90 deg with the bend line. When i made a new sketch and made it 90 deg, i was able to make the bend and use that line as a guide.