topic Joint misalignment issue in Fusion Support Forum

Joint misalignment issue

rmkolaks — Sun, 14 Jul 2019 19:21:30 GMT

This appears to be rather straightforward.

I have created a set of identical components linked together with slider joints. When creating the joints all looks to be well and good. All joints are at the correct location and have no angular displacement. (ref attachment: Fusion360 Joints Issue #2.

However, once all joints have been created and the components are displayed as a unit an angular error emerges. Am I correct in assuming a rounding error?

(ref attachment: Fusion360 Joints Issue #1)

Re: Joint misalignment issue

jhackney1972 — Sun, 14 Jul 2019 19:27:05 GMT

You need to attach your model so others can look at your issue and offer suggestions

Re: Joint misalignment issue

rmkolaks — Tue, 16 Jul 2019 22:29:39 GMT

I went back to the original sketches and found line that was off by a couple micrometers. Edited the drawing. Had to rebuild the joints.

Still causes an error but not worth messing with at the moment.