topic Re: Drawing dimension not rounding when 2 digit precision selected in Fusion Support Forum

Drawing dimension not rounding when 2 digit precision selected

Anonymous — Thu, 25 Jul 2019 12:08:10 GMT

Hello,

I am creating a drawing for a part and when I select 2 digit precision (in a value such as 1.035) the displayed value is 1.03 and I want 1.04. In the same situation, I have noticed that when the value is 1.038 it will display as 1.04. Is there a setting somewhere that controls this dimension rounding?

Thanks,

Mike

Re: Drawing dimension not rounding when 2 digit precision selected

HughesTooling — Thu, 25 Jul 2019 13:37:11 GMT

@Anonymous wrote:

Hello,

I am creating a drawing for a part and when I select 2 digit precision (in a value such as 1.035) the displayed value is 1.03 and I want 1.04. In the same situation, I have noticed that when the value is 1.038 it will display as 1.04. Is there a setting somewhere that controls this dimension rounding?

Thanks,

Mike

Don't think there's a round up option. What you'll probably find is your 1.035 dimension is actually something like 1.0349 if you go to more decimal places so it displays as 1.035 rounded to 3 places but rounds to 1.03 for 2 places.

Mark

Re: Drawing dimension not rounding when 2 digit precision selected

HughesTooling — Thu, 25 Jul 2019 13:58:25 GMT

Just in case it helps anyone, you can force a round up in the model workspace using a parameter. So for 2 places use ceil with the value multiplied by 100 then divide the result by 100.

Mark