topic Re: rectangular parts pattern problem in Fusion Support Forum

rectangular parts pattern problem

bobXU6LG — Thu, 22 Aug 2019 18:35:49 GMT

I have a sub-assembly with parts placed using rectangular pattern.

This assembly is used in a master assembly. In the master assembly, the patterned parts are in a different location completely outside of the assembly. The assemblies are both up to date and saved. I tried changing the pattern and it makes no difference.

Re: rectangular parts pattern problem

jhackney1972 — Thu, 22 Aug 2019 18:48:44 GMT

Attach your model for the best help.

Re: rectangular parts pattern problem

bobXU6LG — Thu, 22 Aug 2019 18:52:24 GMT

I do not want it the public. I assumed an Autodesk guy would pick up on this and offer assistance

Re: rectangular parts pattern problem

ryan.bales — Thu, 22 Aug 2019 19:09:38 GMT

@bobXU6LG, I would certainly say @jhackney1972 is just as qualified as any to troubleshoot this. Even if it terminates as a defect he would tag someone to look, verify and log it.

That being said - and without seeing the model - i'd suggest a compute all to see if its fixed. If not we DO need the model because it falls under ongoing investigation into assembly quirks.

Re: rectangular parts pattern problem

bobXU6LG — Thu, 22 Aug 2019 19:16:50 GMT

Compute all does not solve the problem. I have submitted the problem to support, Case 15685790 . I thought this was the support page when I first posted. I consider my designs proprietary and do not like to post them on public sites. I have had too much stuff ripped off in the last 40 years of cad!

Re: rectangular parts pattern problem

ryan.bales — Thu, 22 Aug 2019 19:22:23 GMT

That sounds good and we don't expect a full copy of anything you are unwilling to share publicly. One way in the forums to share is by sending a shared link privately.