topic Re: Rotate view is broken in sketch mode in Fusion Support Forum

Rotate view is broken in sketch mode

daver18qc — Fri, 06 Sep 2019 14:12:32 GMT

Hi guys !
I have noticed something after the second to last update.

The rotate view seems to be broken;

Steps to reproduce :
-Open new sketch, go off-center to about -100 -100 (x;y) and draw a square.
-Extrude it some.
-Now make a new sketch on a face and middle-mouse click to rotate the view.
The view will pivot around the origin, instead of around the centered object.
Quite annoying really..

I checked that my camera was in orthographic mode, it is.
I checked that the camera setting doesn't change when i get the bug, and it doesn't, so it doesn't seem like a wrong setting problem.
As i said, this was not happening 2 updates ago. The second to last update broke this for me.

*Windows 7 x64

Re: Rotate view is broken in sketch mode

daver18qc — Fri, 06 Sep 2019 14:30:23 GMT

I made a small video to demonstrate

[video]

Re: Rotate view is broken in sketch mode

jeff_strater — Fri, 06 Sep 2019 14:59:02 GMT

@daver18qc - I'm pretty sure nothing has changed here in the recent past. You can reset the view rotation center by moving the cursor over some geometry, holding down Shift and clicking the scroll wheel on your mouse. A little green dot will appear that shows the new view rotation center. I don't have the ability to demo it at the moment, unfortunately.

Re: Rotate view is broken in sketch mode

daver18qc — Fri, 06 Sep 2019 15:08:30 GMT

Ok i didn't know that shortcut, it works.
It's a bummer i'll have to do that everytime i sketch though, really takes a toll on the productivity having to re-center the view each time. Oh well, at least it's a fix !