topic Weird diagonal lines in fusion. in Fusion Support Forum

Weird diagonal lines in fusion.

keagan_carrigan — Sun, 21 Jul 2024 22:57:56 GMT

Not sure what's wrong because it hasn't done this before on other computers to me. The items in the drop down menus and in in the toolbar at the top all look normal, but the actual working area has awful resolution and is almost squiggly. I will respond if more details are needed.

回复： Weird diagonal lines in fusion.

Steven_Gao — Mon, 22 Jul 2024 02:53:21 GMT

Can you have the check for the Display option below Preference->Graphics->Display?

Thanks,

Steven

Re: Weird diagonal lines in fusion.

g-andresen — Mon, 22 Jul 2024 07:55:59 GMT

Hi,

try „antialiasing“ in your display setting

günther

Re: Weird diagonal lines in fusion.

keagan_carrigan — Mon, 22 Jul 2024 06:29:49 GMT

Hi, thanks for your response. When I click on the little screen icon at the bottom, it has antialising checked in grey. But when I do a graphics diagnostic, it say it is not on. Not sure where to enable it then...

Re: Weird diagonal lines in fusion.

HughesTooling — Mon, 22 Jul 2024 07:40:54 GMT

@keagan_carrigan Do you have Limit effects enabled on the graphics diagnostics dialog? If you do it disables Anti-Aliasing.

Re: Weird diagonal lines in fusion.

keagan_carrigan — Tue, 23 Jul 2024 01:11:49 GMT

No, I have it unchecked as i was checking graphics settings to see what i could do to maybe fix it.

Re: Weird diagonal lines in fusion.

g-andresen — Tue, 23 Jul 2024 05:07:53 GMT

Hi,

might help

(view in My Videos)

günther

Re: Weird diagonal lines in fusion.

keagan_carrigan — Tue, 23 Jul 2024 05:47:49 GMT

I found it was some wierd settings because my laptop has a nux switch, so it had some wierd effecta. Fixed it now.