topic Re: I used to have a profile tolerance in my title block, now i have a d. in Fusion Support Forum

I used to have a profile tolerance in my title block, now i have a d.

squee45 — Tue, 08 Oct 2019 03:59:37 GMT

I don't recall exactly how I got the profile tolerance symbol in the title block, i thin I had to look up the unicode, it seems to have been broken in an update. why cant I put any dammed symbol I want from the drop down, and not a small curated selection. its not like to try and do good drawings in GD&T you don't need this and other symbols in the title block tolerances, oh no its exactly that. this is yet another place where fusion falls flat on its face with its drawing package. I am sick and tired of doing extra work to produce drawings that are worse than what I used to make in solidworks.

Re: I used to have a profile tolerance in my title block, now i have a d.

ryan.bales — Tue, 08 Oct 2019 20:19:26 GMT

It should still be under feature control frame. This is a very quick and simplistic example but here is where it is:

Re: I used to have a profile tolerance in my title block, now i have a d.

squee45 — Tue, 08 Oct 2019 21:59:26 GMT

So attached is a screenshot of what I had, and it turns out the problem is a windows vs mac thing. my work computer (mac) still has the profile symbol in the tolerance block, but my home machine (windows) displays a d.

Re: I used to have a profile tolerance in my title block, now i have a d.

baribak — Wed, 09 Oct 2019 03:33:36 GMT

Hi,

Have you tried another font? Could be the typeface doesn't support that character and you need to use one that does?

Regards,

Re: I used to have a profile tolerance in my title block, now i have a d.

ryan.bales — Wed, 09 Oct 2019 14:50:56 GMT

I'll have to test on a windows machine today to see whats going on.