2D Plasma Cutting - Setting Probe Feed Rate Independently From Lead-In Feed Rate

Anonymous — Sat, 09 Nov 2019 03:22:51 GMT

I've searched for answers a few different places and haven't come up with anything.

I'm trying to find out if there is a way to set my probe feed rate independently from my lead-in feed rate. When I set my feed rate for my lead-in, it also uses that value as my probe feed rate. In the pictures I'm posting, I want my probe feed rate to be at 30 ipm (much higher and the Z-axis overshoots). However, I want my lead-in feed rate to match my cutting feed rate (in this case 90 ipm). I'm using Mach3 to run my table. Is there maybe some configuration I need to edit that will set the probe feed rate (therefore overriding Fusion 360) in the configuration file?

I know I can manually edit the G-Code to the rates I want, but I'm hoping there is a way to do this automatically.

Thanks for any help you folks can give.

topic 2D Plasma Cutting - Setting Probe Feed Rate Independently From Lead-In Feed Rate in Fusion Support Forum

2D Plasma Cutting - Setting Probe Feed Rate Independently From Lead-In Feed Rate