topic Re: Frame Generator ? in Fusion Support Forum

Frame Generator ?

Anonymous — Thu, 14 Nov 2019 11:05:33 GMT

Hello,

How to use Frame Generator in Fusion 360 ?

Re: Frame Generator ?

TheCADWhisperer — Thu, 14 Nov 2019 12:10:53 GMT

Can you cite your reference?

l have never heard of Frame Generator in Fusion 360.

I have heard of Frame Generator in Autodesk Inventor Professional.

(Just did a couple of videos on my YouTube Channel for my welding class - see link below.)

Re: Frame Generator ?

Anonymous — Thu, 14 Nov 2019 12:17:54 GMT

Hello,
Thanks for your response.
I seen in youtube, that frame generator add-in is available for fusion 360.

The link is pasted below,

https://youtu.be/ohPvPDv9HJs

Kindly support me if there is any frame generator add-in available for
fusion 360.

Thanks and regards
Sriman G

Re: Frame Generator ?

TheCADWhisperer — Thu, 14 Nov 2019 12:45:48 GMT

When I go to that link - it appears to me that that project was abandoned.

You might be able to replicate simple profiles with Pipe command or more complex profiles with Sweep command.

I wrote a similar paper on how to do this with AutoCAD many years ago that could be converted to Fusion techniques if you were interested.

Otherwise, if you are a student, you can download Autodesk Inventor Professional for free from http://www.autodesk.com/edcommunity for a robust set of tools for designed for this purpose.

Re: Frame Generator ?

Anonymous — Thu, 14 Nov 2019 13:02:54 GMT

I will try..
Thanks for your response...