topic Re: Circular Dependency in Fusion Support Forum

Circular Dependency

moriarty.chch — Tue, 10 Dec 2019 07:37:20 GMT

Im plagued with circular dependency issues ...

Ive attached a knocked-down file that still exhibits this behavior

.... if you load it then Compute All (Ctrl+B) you will get circular dependency.

Whilst with the error, delete Draft6 and the following Deletion Warning occurs

Cancel and go back to the original setup 2x UnDo

Cntrl+B still crashes it ... UnDo

Edit Draft6 and just click OK - model builds OK

Try Cntl+B ... crashes

One fix is delete Draft6 and remodel it - sometimes this works and sometimes it doesnt ... the fault can come back with a different tool so is probably something other than the draft.

2.0.6670 Win10

Re: Circular Dependency

TrippyLighting — Tue, 10 Dec 2019 11:19:22 GMT

The extrusion of the half circle is set to "join". If you set that to "New body" and then delete and re-apply the draft this will remove the circular dependency. Maybe also fully constrain and dimension that sketch 😉

Re: Circular Dependency

jeff_strater — Tue, 10 Dec 2019 19:56:49 GMT

@moriarty.chch - thank you for cutting down the file to such a small timeline. That really helps us. This does show a bug in Fusion that has been logged as FUS-57844. We will look into a fix for this problem.

Re: Circular Dependency

moriarty.chch — Tue, 10 Dec 2019 22:07:45 GMT

thanks for the input everyone

You can Edit and OK the Draft, Extrusion and Sketch elements

If you try and do this with Moveface it throws a circular dependency error straight away

looks like theres some issue with Moveface