https://forums.autodesk.com/t5/fusion-support-forum/mistake-in-material-library/m-p/9198965#M129225 <P>Hello,</P><P>&nbsp;</P><P>I discover a mistake in the material library for the stainless steel 316L. The Thermal Expansion Coefficient is set at 159 um/( m.°C) instead of 15.9. As you can imagine, it could create a big mistake in simulation. I hope it will help you to improve your software.</P><P>&nbsp;</P><P>Regards</P><P>&nbsp;</P><P>Nicolas Craquelin</P> Thu, 12 Dec 2019 15:34:15 GMT Anonymous 2019-12-12T15:34:15Z https://forums.autodesk.com/t5/fusion-support-forum/mistake-in-material-library/m-p/9198965#M129225 <P>Hello,</P><P>&nbsp;</P><P>I discover a mistake in the material library for the stainless steel 316L. The Thermal Expansion Coefficient is set at 159 um/( m.°C) instead of 15.9. As you can imagine, it could create a big mistake in simulation. I hope it will help you to improve your software.</P><P>&nbsp;</P><P>Regards</P><P>&nbsp;</P><P>Nicolas Craquelin</P> Thu, 12 Dec 2019 15:34:15 GMT https://forums.autodesk.com/t5/fusion-support-forum/mistake-in-material-library/m-p/9198965#M129225 Anonymous 2019-12-12T15:34:15Z https://forums.autodesk.com/t5/fusion-support-forum/mistake-in-material-library/m-p/9199696#M129226 <P>Hi Nicolas,</P> <P>&nbsp;</P> <P>Many thanks for catching this and bringing it to our attention.&nbsp; It's logged in our system as ID-57999 and forwarded onto Development to be addressed in a future update.</P> <P>&nbsp;</P> <P>Best regards,</P> Thu, 12 Dec 2019 20:45:13 GMT https://forums.autodesk.com/t5/fusion-support-forum/mistake-in-material-library/m-p/9199696#M129226 henderh 2019-12-12T20:45:13Z