topic Re: Any one can help to slove the problem that black square shown when I sketch in Fusion Support Forum

Any one can help to slove the problem that black square shown when I sketch

Anonymous — Sat, 21 Dec 2019 11:21:18 GMT

Re: Any one can help to slove the problem that black square shown when I sketch

TheCADWhisperer — Sat, 21 Dec 2019 15:50:00 GMT

What visual Environment are you using?

OK, took a second look at your image.

File>Export and then Attach your *.f3d file here that exhibits this behavior.

Re: Any one can help to slove the problem that black square shown when I sketch

jeff_strater — Sat, 21 Dec 2019 19:42:46 GMT

@Anonymous - please share the model here. That "black square" looks to me like a body on which you have created the sketch. You can turn off body visibility in the browser if that is in your way. The color will be driven by the material/appearance you are using on the body.

Re: Any one can help to slove the problem that black square shown when I sketch

Anonymous — Sun, 22 Dec 2019 08:20:21 GMT

The problem was solve automatically, all back to normal. Thank you all.

Re: Any one can help to slove the problem that black square shown when I sketch

Anonymous — Tue, 17 Nov 2020 22:53:23 GMT

I'm having the same problem! What should i do? Are there any updates or fixes for this? Thank you

Re: Any one can help to slove the problem that black square shown when I sketch

TheCADWhisperer — Wed, 18 Nov 2020 00:18:45 GMT

Can you File>Export your *.f3d file to your local drive and then Attach it here to a Reply?

Re: Any one can help to slove the problem that black square shown when I sketch

Anonymous — Wed, 18 Nov 2020 08:04:04 GMT

it was just the fact that the grid was set to 0.1 mm from the past project while now i'm creating a bigger one starting from a canva. By zooming out the grid doesn't adapt automatically and the lines get very dense on the plane resulting in a black square. I didn't think about that since, in other software i use, the grid step adacts itself while zooming in and out.

Re: Any one can help to slove the problem that black square shown when I sketch

jeff_strater — Wed, 18 Nov 2020 18:16:51 GMT

you can control the grid setting, to be either fixed or adaptive: