https://forums.autodesk.com/t5/fusion-support-forum/display-window-losing-high-order-numbers/m-p/9218790#M128453 <P>I believe that there is a bug in the "Display" routine, in "Sketch" with the "Center Rectangle" command.</P><P>When the value goes above 99.x mm, it loses the hundreds position, ie : 118 mm is shown as 18mm.</P><P>However, if you persist and enter 118mm, the proper position is taken up, that is 118 mm.</P><P>Also, it would be nice to have the "Chamfer" command along with the "Filet" command in the "Sketching".</P> Tue, 24 Dec 2019 16:32:38 GMT agareau 2019-12-24T16:32:38Z https://forums.autodesk.com/t5/fusion-support-forum/display-window-losing-high-order-numbers/m-p/9218790#M128453 <P>I believe that there is a bug in the "Display" routine, in "Sketch" with the "Center Rectangle" command.</P><P>When the value goes above 99.x mm, it loses the hundreds position, ie : 118 mm is shown as 18mm.</P><P>However, if you persist and enter 118mm, the proper position is taken up, that is 118 mm.</P><P>Also, it would be nice to have the "Chamfer" command along with the "Filet" command in the "Sketching".</P> Tue, 24 Dec 2019 16:32:38 GMT https://forums.autodesk.com/t5/fusion-support-forum/display-window-losing-high-order-numbers/m-p/9218790#M128453 agareau 2019-12-24T16:32:38Z