https://forums.autodesk.com/t5/fusion-support-forum/fusion-360-will-not-take-depth-of-cuts-inside-profile-roughing/m-p/9247855#M127000 <P>Are you able to share your design, so we can take a look for you?</P> Mon, 13 Jan 2020 19:40:46 GMT gavbath 2020-01-13T19:40:46Z https://forums.autodesk.com/t5/fusion-support-forum/fusion-360-will-not-take-depth-of-cuts-inside-profile-roughing/m-p/9247516#M126999 <P>Fusion 360 will not take depth of cuts on inside profile roughing on lathe tool path. The tool takes it&nbsp; in one pass no matter what I put in the depth of&nbsp; cut tab,&nbsp; I change the tool size to small tool and still get the same thing.</P> Mon, 13 Jan 2020 16:59:10 GMT https://forums.autodesk.com/t5/fusion-support-forum/fusion-360-will-not-take-depth-of-cuts-inside-profile-roughing/m-p/9247516#M126999 Anonymous 2020-01-13T16:59:10Z https://forums.autodesk.com/t5/fusion-support-forum/fusion-360-will-not-take-depth-of-cuts-inside-profile-roughing/m-p/9247855#M127000 <P>Are you able to share your design, so we can take a look for you?</P> Mon, 13 Jan 2020 19:40:46 GMT https://forums.autodesk.com/t5/fusion-support-forum/fusion-360-will-not-take-depth-of-cuts-inside-profile-roughing/m-p/9247855#M127000 gavbath 2020-01-13T19:40:46Z