topic Re: Fusion 360 drawing Inspection callout in Fusion Support Forum

Fusion 360 drawing Inspection callout

JrandallAZ79B — Fri, 16 Aug 2024 18:36:27 GMT

My companies drawing standards are to add inspection bubble/balloons around all dimensions that must be inspection to insure that parts are functional. Fusion allows me to add the Inspection bubble to normal dimensions, but not hole call out dimensions. this is an issue as holes and threaded holes must be inspected for a parts function. I currently have to draw a square around the hole call outs. This looks unprofessional. and I have to redraw the square if I move the hole call out or drawing. Can we get this feature added?

Re: Fusion 360 drawing Inspection callout

-KyleWilliams- — Fri, 16 Aug 2024 20:13:55 GMT

Hey @JrandallAZ79B

Thanks for reaching out.
We track all feature requests internally and I will added your request.

When you say you have to draw the square are you doing this using the sketch tool in the drawings workspace or some other method?

Thanks

Re: Fusion 360 drawing Inspection callout

JrandallAZ79B — Fri, 16 Aug 2024 20:46:40 GMT

Yes I use the sketch tool within the drawing workspace.