topic Re: Sketch no longer auto-rotate after update in Fusion Support Forum

Sketch no longer auto-rotate after update

cka3ka2 — Wed, 11 Mar 2020 14:33:54 GMT

Normally when I create new sketch view automatically goes to orphographic and turns to correct view port (i.e. when I'm creating sketch in XY plane, view will go to Top). Something happened after latest update that it no longer does this. Nothing moves, and I didn't even realize I was in sketch view for a minute... Can this be changed somewhere in the settings?

Re: Sketch no longer auto-rotate after update

jeff_strater — Wed, 11 Mar 2020 14:40:42 GMT

this is a change as a result of the 3D sketch changes. If you have "Allow 3D sketching of lines and splines" checked:

it over-rides auto-look-at. I'm not sure yet if that was intentional or a bug, but if you disable 3D sketching, this will return to normal.

Re: Sketch no longer auto-rotate after update

cka3ka2 — Wed, 11 Mar 2020 14:42:26 GMT

Thanks a lot! Disabling that option did the trick!

Re: Sketch no longer auto-rotate after update

Anonymous — Sun, 14 Feb 2021 13:23:18 GMT

Didn't work for me on latest version

Re: Sketch no longer auto-rotate after update

g-andresen — Sun, 14 Feb 2021 14:43:16 GMT

Hi,

Please show the behaviour in a screencast.

What about the Sketch Palette?

günther

Re: Sketch no longer auto-rotate after update

Anonymous — Sun, 14 Feb 2021 18:25:10 GMT

Hi Gunther
Is ok seems to have sorted itself.

Andy

Re: Sketch no longer auto-rotate after update

moustick2025 — Tue, 08 Jun 2021 23:19:50 GMT

thank a lot, it was a pain to always changing the plane manually.

Re: Sketch no longer auto-rotate after update

Craig_Crandall — Sat, 23 Oct 2021 17:57:33 GMT

Shouldn't this be reported as a bug. It's 10/23/2021 and this issue is still present when 3D Sketches is enabled.

Re: Sketch no longer auto-rotate after update

jhackney1972 — Sat, 23 Oct 2021 18:58:47 GMT

When you are using 3D Sketch enabled, you do not want the view to auto-rotate to any 2D plane or face. If it did, what is the use of having 3D Sketch enabled? If you are using 3D Sketch and have to place your view to a particular face or plane, including any origin plane, simply use the Look At command. I believe it functions as it should.